High Speed Gap-Bed Precision Lathe (65mm Spindle Bore)

Features: **Large Spindle Bore Of 65mm **Main Spindle Dynamic Balanced, And Supported At 2 Points With Taper Roller Bearings Of Harbin Brand **Outward Appearance Featuring Large Plains, Making The Machine More Good-Looking **Gapped Bedways, Which Are Super-Audio Frequency Hardened (HB 450 Plus) **All Gears Hardened And Ground By Reishauer Grinding Machine **Leadscrew And Feedrod Interlocked, Both With Overload Protection **Automatic Feed Stopper **Configuration Variable Totally According To Orders: Metric Or Inch System; Right Or Left Hand Wheel; Large Plane Type; Halogen Lamp; Quick Change Tool Past; DRO; T-Slot Compound; Chuck Guard; Leadscrew Hood; Rapid Traverse Motor; Electromagnetic Brake; Forced Lubrication System Specifications Model No.: CD6236B / CD6240B / CD6245B / CD6250B / CD6260B Max. Swing Over Bed (Mm): 360(14″) / 400(16″) / 450(18″) / 500(20″) / 600(24″) Max. Swing Over Cross Slide (Mm): 185(7'/4") / 225(9") / 285(11'/4") / 325(13") / 360(14″) Center Distance (Mm) : 1000, 1500, 2000mm Max Swing In Gap (Mm): 490(20″) / 530(21″) / 580(23″) / 630(25″) / 730(29″) Valid Length Of Gap: 260mm (10′/4″) Bed Width: 330mm(13″) Spindle Hole: 65mm(23/5″) Spindle Nose: ISO-C6 Or ISO-D6 Spindle Taper: Metric 70mm Spindle Speeds (Number): 22-1800rpm (15 Steps) FEEDS Metric Threads Range (Kinds): 0.5-28mm (66kinds) Inch Threads Range (Kinds): 1-56 Tpi (66kinds) Module Threads Range (Kinds): 0.5-3.5mm (33kinds) Diametral Threads Range (Kinds): 8-56 Tpi (33kins) Longitudinal Fees Range (Kinds): 0.072-4.038mm/Rev(0.0027-0.15 Inch/Rev) (66kinds) Cross Feeds Range (Kinds): 0.036-2.019mm/Rev(0.0013-0.075 Inch/Rev) (66kinds) Rapid Traveling Speed Of Carriage: 5m/Min (16.4ft/Min) Leadscrew Size: Diameter/Pitch: 35mm/6mm Or 35 Mm/(1/4″) Cross Slide Travel: 300mm (13″) Compound Rest Travel: 130mm(5″) Cross-Section Size Of Toolshank: 20*20mm 25*20mm/(1*6/8inch) 25*25mm Taper Of Tailstock Sleeve: Morse No.5 Diameter Of Tailstock Sleeve: 65mm(23/5″) Travel Of Tailstock Sleeve: 120mm(43/4″) Main Drive Motor: 4.0kw Or 5.5kw Or 7.5kw 7.5kw Coolant pump motor: 0.125kw Rapid traverse moter: 0.12kw If You Are Interested In This Series Lathe, Pls Feel Free To Contact Mr. Leo For Catalogues And Prices.